MacNorth

MacNorth’s NG

Carbon Hexa Description

My first Hexacopter, based on released NG HW 0.22 with a custom carbon CNC frame.

Specifications

||<tablestyle=“width: 95%">Maidenflight||19.02.2011|| ||HW Revision||HW-0.22|| ||Motors||6x Turnigy 35-30C 1100kv|| ||Controllers||6x 30A Quax’s firmware|| ||Propellers||APC1047 or EPP1247|| ||Receivers||JR921 2.4GHz using RC SUM|| ||Total Weight||?|| ||Motor Weight||78g/motor|| ||Frame Weight||? || ||Frame Type||Custom Carbon Frame|| ||Frame Span||60cm|| ||Batteries||30C 5000mAh||

Pictures

Pictures of the hexa will be added soon.

Quad Description

My first quadrocopter, based on released NG HW 0.22 with 12.7mm alu frame, modified CargoNG-frame milled out of 1.5mm Carbon Fiber and custom vibration mounts for sensor board assembly.

Specifications

||<tablestyle=“width: 95%">Maidenflight||08.05.2010|| ||HW Revision||HW-0.22|| ||Motors||4x Turnigy 35-30C 1100kv|| ||Controllers||4x 30A Quax’s firmware|| ||Propellers||APC1047|| ||Receivers||JR921 2.4GHz|| ||Total Weight||?|| ||Motor Weight||78g/motor|| ||Frame Weight||? || ||Frame Type||Alu-Cross 12.7mm with modified CargoNG-frame|| ||Frame Span||44cm|| ||Batteries||30C 2200mAh||

Pictures

Videos

First beta DCM flight test with GoProHD Camera payload.