Historical project documentation. Content is maintained in GitLab.

NGWI232

Documentation / Part Lists/Wi232-NGNext Section

Wi232-NG parts list

This is the parts list for the Wi232-NG.

NameValue / ManufacturerPart Type / DescriptionPackageQuantityCommentsReicheltFarnellDigikeyMouser ElectronicsOther
R1100 ohmResistor08051SMD-0805 100Ohm311-100CRCT-ND
R2-R6470 ohmResistor08055SMD-0805 470Ohm311-470CRCT-ND
C2, C3, C5100nFCapaciator08053X7R-G0805 100N311-1140-1-ND
C1, C410µFCapaciator08052X5R-G0805 10/16
L1BLM21PG600Inductor0805/Murata1BLM21PG 600BLM21PG600SN1D
LED1LED grünLED08051SMD-LED 0805 GN754-1131-1-ND
IC1Wi232EUR-RIC1TRM-868-EURTRM-868-EUR
IC2MCP1700T-3302E/TTICSOT-231MCP1700T3302ETTCT-ND
X1Molex PicoBlade 53261-04Connector53261-011125374WM7622CT-ND

The wireless module Wi-232-EUR-R is no longer sold. The replacement part is the TRM-868-EUR module. The original vendor Radiotronix was bought up by the company Linx Technologies, Inc which resulted in the new product name. The Wi-232-EUR and the TRM-868-EUR are identical in function and features.

Commissioning

For initial operation parameters of the TRM-868 have to be set. This can be done with the NG-USB (Crossover mode), shorted J1 and configuration software. Either the original Radiotronix attachment:WI232_setup.zip can be used which requires the CTS signal to be configured, for the NG-USB the CTS# pin of the FTDI232R has to be patched to GND. Alternatively StompSC patched Radiotronix tool (but limited in available COM ports and sometimes instable) can be used, it works without RTS/CTS: attachment:Wi.232EUR-R-Tool-no-CTS.rar