NGVideo-5_8GHz-TX

Part Lists for the NG Video 5.8GHz TX

/!\ Note: The use and operation of this product in most states, countries requires a HAM or Amateur radio license. NG.UAVP.ch and the devs of this pcb set cannot be held responsible for your actions if you use this product without proper licensing. /!\

The following tables list the electronic parts needed to build the Video boards.

/!\ This is work in progress and preliminary information /!\

Now our partlist is sorted by distributor. The distributor is selected by availability and minimum number of distributor which are Reichelt Electronik and Farnell

That way you will get all the parts at around EURxx.- at the time of writing.

Browsers for Printing this Partlist:

• Firefox: best browser with landscape orientation und 50% scaling
• Opera: good Result with landscape orientation und automatic scaling
• Internet Explorer: nearly impossible to get the full table printed

Build Options

Device table

table of the different airwaves moduls

Channel selection

There are 3 dip Switches to select the tx channel

Partlist

Partlist of the 5,8hgz tx

Board 1

/!\ add some tape (eg. isolating tape) under the airwaves module to protect it from short circuit /!\

Board 2

documentation and schematics

attachment:ng-video-5.8ghz_tx.pdf