Electronics

Electronics

These are dependent on the hardware-version you have.

HW 0.23-mini

This Hardware is not yet released!

For the mini, you can fly with only one main PCB:

1. The FlightControl Board (FC) with the ARM7 (LPC2148), the MPU-6000 Gyro- and Accelerometer MEMS soldered directly ontop.

HW 0.22-mini

For the mini, you can fly with only one main PCB:

1. The FlightControl Board (FC) with the ARM7 (LPC2148), one Gyro and the Accelerometer soldered directly ontop.

2. The Breakouts for the two other Gyros

HW 0.22

There is a recommended order to populate the electronics part: Mounting

As for 0.21, the 0.22 Electronics of the UAVP-NG consists of two main PCBs:

1. The FlightControl Board (FC) with the ARM7 header board (LPC2148) plugged in, on top of it.

2. The SensorBoard (SB) with the Breakouts for the Gyros and the Accelerometer (ACC) soldered on

HW 0.21

For 0.21, the Electronics of the UAVP-NG consists of two main PCBs:

1. The FlightControl Board (FC) with the ARM7 header board (LPC2148) plugged in, on top of it.

2. The SensorBoard (SB) with the Breakouts for the Gyros and the Accelerometer (ACC) soldered on

NGBLC-4mini or others

NGBLC-4mini provides 4 brushless controllers on a single PCB.

1. NGBLC-4mini

NG-Video-5.8

The NG-Video 5.8 consists of four PCBs of which you will use three (depending on your transmitter module)

1. NG-Video-5.8-TX

2. NG-Video-5.8-RX with NG-Video-5.8-Display

Tools

There are some accessory boards:

1. NGusb

2. NGcon